SolidPOOL

The SolidPOOL block system gives you the opportunity to tailor your construction to your exact requirements.

Any shape or size is possible due to the SolidPOOL and SolidPOOL Flex design. Any type of finish can be applied including tiles, liner, or reinforced PVC.

The Blocks can be Installed above ground up to 2m in height without bracing, and because of its lightweight construction only 3.7 kg per block its ideal for installation in areas with limited access.



The solid pool range is free-standing meaning no struts are required leading to a minimum excavation area, making it an ideal solution for small areas and indoor swimming pools, in ground pools and above ground pools, ponds and walls.





Montage kit piscine en 3D - Solidpool by pperrot69

The solidpool formwork block is made of two polypropylene plates, twenty “insert screws and two clips ( top and bottom)
A great quality of material for extraordinary durability.


The blocks are 530mm high x 605mm long x 150mm wide and weigh just 3.7kg. They come with a solid front for liners and a perforated front for tiling.

The Block has a v shaped perforated front which lets the concrete through, thus allowing exceptional tile fixation, just apply a waterproof coating and lay the tiles in place.